Synthesis of medium and large phostams, phostones, and phostines

• Jiaxi Xu

Beilstein J. Org. Chem. 2023, 19, 687–699, doi:10.3762/bjoc.19.50

• and NaCl. Only one example was reported for this class of the synthesis via C–C bond formation (Scheme 10) [30]. 1.2 Synthesis via C–O bond formation Halocyclization has been widely applied in the syntheses of phostone and phostine derivatives via C–O bond formation [13][17]. Both bromo and iodo

An efficient metal-free and catalyst-free C–S/C–O bond-formation strategy: synthesis of pyrazole-conjugated thioamides and amides

• Shubham Sharma,
• Dharmender Singh,
• Sunit Kumar,
• Vaishali,
• Rahul Jamra,
• Naveen Banyal,
• Deepika,
• Chandi C. Malakar and
• Virender Singh

Beilstein J. Org. Chem. 2023, 19, 231–244, doi:10.3762/bjoc.19.22

Combining the best of both worlds: radical-based divergent total synthesis

• Kyriaki Gennaiou,
• Antonios Kelesidis,
• Maria Kourgiantaki and
• Alexandros L. Zografos

Beilstein J. Org. Chem. 2023, 19, 1–26, doi:10.3762/bjoc.19.1

• a semipinacol rearrangement leading to 95, followed by subsequent cyclization to natural products guignardone A (96) and C (97). This process involved 1,2-allyl migration and C–O bond formation through a semipinacol rearrangement and a cyclodehydration cascade reaction (Scheme 8). Following the same

A new route for the synthesis of 1-deazaguanine and 1-deazahypoxanthine

• Raphael Bereiter,
• Marco Oberlechner and
• Ronald Micura

Beilstein J. Org. Chem. 2022, 18, 1617–1624, doi:10.3762/bjoc.18.172

• reports found in the literature suffer from the requirement of hazardous intermediates and harsh reaction conditions. Here, we report a new six-step synthesis for c1G base, starting from 6-iodo-1-deazapurine. The key transformations are copper catalyzed C–O-bond formation followed by site-specific

• 3,4-dihydropyran in dimethylformamide to obtain the corresponding tetrahydropyranyl-protected amine 17. Subsequently, a copper-catalyzed C–O bond formation at C6 using benzyl alcohol in the presence of caesium carbonate, copper(I) iodide, and 1,10-phenanthroline furnished benzyl ether 18 in excellent

• ) starts from the tetrahydropyranyl-protected 6-iodo-1-deazapurine 17 which was converted into the O6-benzyl derivative 31 using the copper-catalyzed C–O-bond formation as described above (Scheme 6). Without purification the crude product was treated with hydrochloric acid in methanol to remove the

Visible-light-mediated copper photocatalysis for organic syntheses

• Yajing Zhang,
• Qian Wang,
• Zongsheng Yan,
• Donglai Ma and
• Yuguang Zheng

Beilstein J. Org. Chem. 2021, 17, 2520–2542, doi:10.3762/bjoc.17.169

• copper-catalyzed C–O cross-coupling reaction. Results of mechanistic studies indicated that in this case a CuI–phenoxide complex is a competent intermediate in the photoinduced C–O bond formation. In 2020, Nguyen and co-worker [90] reported copper-catalyzed C–O cross-coupling of glycosyl bromides with

Recent advances in the tandem annulation of 1,3-enynes to functionalized pyridine and pyrrole derivatives

• Yi Liu,
• Puying Luo,
• Yang Fu,
• Tianxin Hao,
• Xuan Liu,
• Qiuping Ding and
• Yiyuan Peng

Beilstein J. Org. Chem. 2021, 17, 2462–2476, doi:10.3762/bjoc.17.163

• ) was also tolerated efficiently under the standard conditions to afford the desired product 46k in 64% yield. In addition, tert-butyldimethylsilyl (TBS)-substituted enynyl azide provided the target product 46l in 34% yield. The transformation involves a sequence of C−N/C−O bond formation, and the

Photoredox catalysis in nickel-catalyzed C–H functionalization

• Lusina Mantry,
• Rajaram Maayuri,
• Vikash Kumar and
• Parthasarathy Gandeepan

Beilstein J. Org. Chem. 2021, 17, 2209–2259, doi:10.3762/bjoc.17.143

• catalysts (Scheme 11) [63]. Here, the use of a zinc-based Lewis acid (LA) was found to activate α-hydroxy C‒H bonds by forming alkoxide (O‒LA) and suppressing the C‒O bond formation by inhibiting the formation of a nickel alkoxide species. The authors also claimed that the use of the zinc-based LA also

On the application of 3d metals for C–H activation toward bioactive compounds: The key step for the synthesis of silver bullets

• Renato L. Carvalho,
• Amanda S. de Miranda,
• Mateus P. Nunes,
• Roberto S. Gomes,
• Guilherme A. M. Jardim and
• Eufrânio N. da Silva Júnior

Beilstein J. Org. Chem. 2021, 17, 1849–1938, doi:10.3762/bjoc.17.126

1,2,3-Triazoles as leaving groups: S_NAr reactions of 2,6-bistriazolylpurines with O- and C-nucleophiles

• Dace Cīrule,
• Irina Novosjolova,
• Ērika Bizdēna and
• Māris Turks

Beilstein J. Org. Chem. 2021, 17, 410–419, doi:10.3762/bjoc.17.37

• -yl)purine with dimethylamine, sodium methoxide and sodium thiomethoxide [39]. Earlier, the use of 6-(1,2,4-triazol-1-yl)purine derivatives in SNAr reactions has been reported [40]. An alternative method for the synthesis of O6-alkylpurines is Pd catalyzed C–O bond formation starting from 6

One-pot synthesis of oxazolidinones and five-membered cyclic carbonates from epoxides and chlorosulfonyl isocyanate: theoretical evidence for an asynchronous concerted pathway

• Esra Demir,
• Ozlem Sari,
• Yasin Çetinkaya,
• Ufuk Atmaca,
• Safiye Sağ Erdem and
• Murat Çelik

Beilstein J. Org. Chem. 2020, 16, 1805–1819, doi:10.3762/bjoc.16.148

• corresponding barrier was calculated to be 13.0 kcal/mol relative to initial reactant complex RC6 (7f+CSI) (Figure 7). Elimination of 18, accompanied by C=O bond formation, constitutes the final step of the reaction observed. Optimized structures are given in Figure 10. The elimination reaction, via the

Oxime radicals: generation, properties and application in organic synthesis

• Igor B. Krylov,
• Stanislav A. Paveliev,
• Alexander S. Budnikov and
• Alexander O. Terent’ev

Beilstein J. Org. Chem. 2020, 16, 1234–1276, doi:10.3762/bjoc.16.107

• rule, a C–O bond is formed in intermolecular reactions, intramolecular cyclization generally occurs with the formation of a five-membered cycle of isoxazoline (C–O bond formation) or nitrone (C–N bond formation). Application of the oxime radicals in organic synthesis: intermolecular reactions Selective

Copper catalysis with redox-active ligands

• Agnideep Das,
• Yufeng Ren,
• Cheriehan Hessin and
• Marine Desage-El Murr

Beilstein J. Org. Chem. 2020, 16, 858–870, doi:10.3762/bjoc.16.77

• -active ligands is itself a much broader area, we shall limit our discussion to copper catalysis with redox-active ligands and the present review aims at providing an overview of the relevant literature on this topic over the last three decades. Review Oxidation: C–O bond formation The central role of

Recent advances in transition-metal-catalyzed incorporation of fluorine-containing groups

• Xiaowei Li,
• Xiaolin Shi,
• Xiangqian Li and
• Dayong Shi

Beilstein J. Org. Chem. 2019, 15, 2213–2270, doi:10.3762/bjoc.15.218

• , promoting the C–F over C–O bond formation via an inner-sphere pathway. Fluorination of arenes, aryl bromides, -alcohols, -triflates, and -boronic acid derivatives: In 2013, Larhed and co-workers [51] established a one-pot, two-step fluorination of aryl alcohols via aryl nonafluorobutylsulfonates. This

Transient and intermediate carbocations in ruthenium tetroxide oxidation of saturated rings

• Manuel Pedrón,
• Laura Legnani,
• Maria-Assunta Chiacchio,
• Pierluigi Caramella,
• Tomás Tejero and
• Pedro Merino

Beilstein J. Org. Chem. 2019, 15, 1552–1562, doi:10.3762/bjoc.15.158

• tetrahydrothiophene (TS3). The IRC (black trace) and O–H (green trace), C–H (brown trace), and C–O (blue trace) distances are also given. The double red arrow indicates the delay between H transfer and C–O bond formation. ELF analysis for the oxidation of cyclopentane (R1). Left: evolution of the electron population

Cobalt-catalyzed nucleophilic addition of the allylic C(sp³)–H bond of simple alkenes to ketones

• Tsuyoshi Mita,
• Masashi Uchiyama,
• Kenichi Michigami and
• Yoshihiro Sato

Beilstein J. Org. Chem. 2018, 14, 2012–2017, doi:10.3762/bjoc.14.176

• remained underdeveloped even though C–O bond formation of allylic C(sp3)–H bonds was firmly established by using SeO2 [14] or CrO3/3,5-dimethylpyrazole [15] (ene-type allylic oxidation). Although the most prominent work on catalytic allylic functionalization studied thus far is considered to be a palladium

Cationic cobalt-catalyzed [1,3]-rearrangement of N-alkoxycarbonyloxyanilines

• Itaru Nakamura,
• Mao Owada,
• Takeru Jo and
• Masahiro Terada

Beilstein J. Org. Chem. 2018, 14, 1972–1979, doi:10.3762/bjoc.14.172

• furnished through direct C–O bond formation at the para-position through ionic cleavage of the N–O bond by cationic Ru(III) as a much stronger Lewis acid, while it is also possible that the second migration of the alkoxycarbonyloxy group from ortho to para occurs prior to proton transfer (Scheme 5b) [25

Recent advances in hypervalent iodine(III)-catalyzed functionalization of alkenes

• Xiang Li,
• Pinhong Chen and
• Guosheng Liu

Beilstein J. Org. Chem. 2018, 14, 1813–1825, doi:10.3762/bjoc.14.154

• -olefin functionalization via C–C and C–O bond formation, in which electron-rich aromatic groups and vinylogous esters acting as independent nucleophiles to provide oxabicyclo[3.2.1]octanes (Scheme 17) [71]. Mechanistically, the olefin is activated by iodine(III) to form species 57 which is followed by

DFT calculations on the mechanism of copper-catalysed tandem arylation–cyclisation reactions of alkynes and diaryliodonium salts

• Tamás Károly Stenczel,
• Ádám Sinai,
• Zoltán Novák and
• András Stirling

Beilstein J. Org. Chem. 2018, 14, 1743–1749, doi:10.3762/bjoc.14.148

• before the C–O bond formation in the ring closing step (see Scheme 1). As an example of the catalytic arylation–cyclisation strategy, an efficient procedure to form substituted oxazoline derivatives from alkyl and aryl propargylamides has been developed. The process involves a 5-exo-dig cyclisation and

Hypervalent iodine(III)-mediated decarboxylative acetoxylation at tertiary and benzylic carbon centers

• Kensuke Kiyokawa,
• Daichi Okumatsu and
• Satoshi Minakata

Beilstein J. Org. Chem. 2018, 14, 1046–1050, doi:10.3762/bjoc.14.92

• –O bond formation has received considerably less attention, even though it represents a promising strategy for the synthesis of valuable alcohol derivatives. One of the classical methods for the decarboxylative C–O bond formation of aliphatic carboxylic acids involves the use of stoichiometric

• development of decarboxylative transformations [1][2][3][4][5][6][7][8][9][10][11][12][13], especially through radical decarboxylation processes, allowing an easy access to valuable compounds from readily available carboxylic acids. However, despite these advances, the oxidative decarboxylation coupled with C

High-yielding continuous-flow synthesis of antimalarial drug hydroxychloroquine

• Eric Yu,
• Hari P. R. Mangunuru,
• Nakul S. Telang,
• Caleb J. Kong,
• Jenson Verghese,
• Stanley E. Gilliland III,
• Saeed Ahmad,
• Raymond N. Dominey and
• B. Frank Gupton

Beilstein J. Org. Chem. 2018, 14, 583–592, doi:10.3762/bjoc.14.45

• screening of bases, the pKa of the amine and alcohol groups present in compound 12 were given careful consideration in order to minimize C–O bond formation (Table 4). NaOH or KOH in ethanol gave low (<40%) conversion, whereas using K2CO3 in ethanol gave 82% conversion to HCQ (Table 4, entry 3). Attempts

Mechanochemical synthesis of small organic molecules

• Tapas Kumar Achar,
• Anima Bose and
• Prasenjit Mal

Beilstein J. Org. Chem. 2017, 13, 1907–1931, doi:10.3762/bjoc.13.186

• process to stabilize the carbocation species. This method was proved to be efficient by performing the reaction at 9.7 mmol scale to obtain 84% yield of the product. C–O bond formation reaction Carbon–oxygen (C–O) bonds are widely present in molecules containing ester, carbamate and amino acid, etc. [88

• alcohols or amines as nucleophile [92]. When 2 equiv of CDI was treated with alcohol in a mixer mill at 30 Hz, within 15 min imidazolecarboxylic acid derivatives were isolated with a new C–O bond formation (Scheme 22). C–X bond forming reactions Carbon–halogen (C–X) bond forming reactions are also

Studies directed toward the exploitation of vicinal diols in the synthesis of (+)-nebivolol intermediates

• Runjun Devi and
• Sajal Kumar Das

Beilstein J. Org. Chem. 2017, 13, 571–578, doi:10.3762/bjoc.13.56

• Sharpless asymmetric dihydroxylation as the sole source of chirality [27]. For the synthesis of chroman derivative 2, first a base-mediated intramolecular SNAr reaction was envisioned for the aryl C–O bond formation under transition-metal-free conditions [28][29][30]. The additional benefit of this strategy

Copper-catalyzed aminooxygenation of styrenes with N-fluorobenzenesulfonimide and N-hydroxyphthalimide derivatives

• Yan Li,
• Xue Zhou,
• Guangfan Zheng and
• Qian Zhang

Beilstein J. Org. Chem. 2015, 11, 2721–2726, doi:10.3762/bjoc.11.293

• aminooxygenation reaction of alkenes with phthalimide and (diacetoxyiodo)benzene through cis-aminopalladation and SN2 C–O bond formation [34]. In 2013, Zhu and co-workers described an n-Bu4NI-catalyzed aminooxygenation of inactive alkenes with benzotriazole and water which underwent a nitrogen-centred radical

Iron complexes of tetramine ligands catalyse allylic hydroxyamination via a nitroso–ene mechanism

• David Porter,
• Belinda M.-L. Poon and
• Peter J. Rutledge

Beilstein J. Org. Chem. 2015, 11, 2549–2556, doi:10.3762/bjoc.11.275

• ) are established catalysts of C–O bond formation, oxidising hydrocarbon substrates via hydroxylation, epoxidation and dihydroxylation pathways. Herein we report the capacity of these catalysts to promote C–N bond formation, via allylic amination of alkenes. The combination of N-Boc-hydroxylamine with

Copper-catalyzed aerobic radical C–C bond cleavage of N–H ketimines

• Ya Lin Tnay,
• Gim Yean Ang and
• Shunsuke Chiba

Beilstein J. Org. Chem. 2015, 11, 1933–1943, doi:10.3762/bjoc.11.209

• spirocyclization of the alkoxy radical D onto the benzene ring affords cyclohexadienyl radical F, oxygenation of which followed by C=O bond formation finally provides the oxaspirocyclohexadienone product 3a. Whereas, the oxidation of the benzylic radical B by the existing Cu(II) species to carbocation G and